Cut Kitchen Cabinets To Fit Refrigerator

If you just cut off the bottom you will lose the detail of the cabinet and then you would have to realign hinges etc.
Cut kitchen cabinets to fit refrigerator. It s ok to simply cut the bottom half of the upper cabinet to fit over the refrigerator. Though not an ideal solution you can trim a wood cabinet provided the side of the cabinet is thick enough to lose the amount of space your fridge requires. Before shaving off the side of a cabinet see if you can fit your fridge underneath by lowering its leveling screws often located behind the base grille on the bottom of the appliance.
Drill four guide holes in the wall studs for the carriage screws for each cabinet. Move the refrigerator into place beneath the top cabinets. Take your measurements first remove the doors unscrew.
If you need to remove two of them cut them both. Move the lower cabinets into place. Concepts for the kitchen replace a.
Screw in two 3 inch screws on the top and bottom nailer strips on the inside of each cabinet through the wall studs. Probably would be best to cut out a section of the middle and then match up the bottom and top especially if the cabinet doors have any kind of decorative edge. Place a level on top of each cabinet to ensure that it will hang evenly when installed.
I work at a cabinet shop and it seems once a month someone buys a new refrigerator and its bigger than the old one so they need to replace the old cabinet ab. Cut kitchen cabinets to fit refrigerator.